Vectra NDR

Download 0
Last updated Nov 20, 2026

Install Guide

Overview

This app collects the logs that Vectra NDR (X Series) sends as CEF syslog into Logpresso Sonar. The collected logs are stored as host and account detection, campaign, host and account scoring, host and account lockdown, audit, and health logs, and you can view them right away in the Vectra NDR dashboard included in the app.

Scope

Note
Works with Sonar 4.0.2502.0 or later. Developed based on the CEF format in the Vectra X Series Syslog 3.15 reference guide, and verified with logs from a Vectra appliance whose CEF header version is 8.9.

Requirements

ItemRequirementNote
Sonar permissionSystem administration permissionAccess to Collect > Loggers
Vectra permissionPermission to change the syslog settingsVectra management console administrator account
Network accessUDP/514 or TCP/514 (Vectra Brain → Sonar collector node, inbound)If you use another port, apply the same port to Vectra and the firewall
Syslog formatCEFLogs sent in the Standard or JSON format are not parsed

Vectra NDR Settings

In the Vectra management console, set Vectra to send syslog to the Sonar collector node. The menu location and item names differ by Vectra version, so refer to the Vectra syslog guide and the administration documents of your version for details. Set the following values.

ItemSetting
DestinationIP address of the Sonar collector node
Port, protocolSame as what the Sonar logger receives (default UDP/514)
FormatCEF
Log typesSelect the log types to collect. This app classifies Host Scoring, Account Scoring, Detections (host and account detections), Campaigns, Audit, Health, Host Lockdown, and Account Lockdown logs
Note
The syslog header must be in the MMM d HH:mm:ss hostname program: format (RFC 3164). Logs sent with an RFC 5424 header are stored as unknown.
Caution
Set the time zone of the Vectra Brain to the same time zone as the Sonar server. The syslog header time has no time zone, so it is recorded in the time zone of the Sonar server. For example, if Vectra sends in UTC and the Sonar server uses Korean time, the log time is off by 9 hours.

Logpresso Collection Settings

Step 1: Add a syslog logger in Sonar

Go to Collect > Loggers, click Add, and enter the following values.

Add logger screen - Vectra NDR logger model and table

TypeItemSetting
RequiredNameA unique name that identifies the logger
OptionalAsset IPSelect it to link the logger to a registered asset
RequiredRun mode, IntervalKeep the defaults. They appear on the screen but do not apply to syslog reception
RequiredStorage locationSelect the node that stores the logs
OptionalCollection locationSelect the sentry when a sentry receives the syslog
RequiredLogger modelVectra NDR
RequiredTableA table name that starts with NDR_VECTRA (e.g. NDR_VECTRA)
Note
The Vectra NDR dashboard included in the app only queries tables whose names start with NDR_VECTRA. With any other name, logs are collected but not shown on the dashboard.

Step 2: Set the receiving options

Enter the logger options at the bottom of the same screen and save.

Logger options screen 1 - remote IP and port Logger options screen 2 - time zone and regex filter

TypeItemSetting
OptionalRemote IPIP of the Vectra Brain. Supports a single IP, an IP1-IP2 range, and CIDR
OptionalPortReceiving port filter. If empty, logs from all receiving ports are accepted

References